I enlarged the holes with a drill bit to minimize the cracking risk-this created space for the screws to move sideways as the back expands and contracts with seasonal changes. Related: Mistakes with Wood Can Cause Your DIY Furniture to Crack As a result, the panel may crack as it expands and contracts with changes in temperature and humidity, as the shelves can restrict its movement. This holder’s design has a drawback: the back panel’s grain is orientated in a different direction than the shelves. Then use a countersink bit to make a hole at each location. Related: What is an Awl? (+ How to Use It) Use an awl to make a starting point for the drill bit at each location. Once you’ve sanded the edges, use the diagram in the printed plan to mark the location for holes that will join the back to the shelves. Whichever saw you use, I recommend cutting next to your pencil line, then fine-tuning your cut by sanding up to it.Ī disc sander is an easy way to smooth the bone’s outside curves however, you can use sandpaper if you don’t have one. I cut the bone shape using a scroll saw, but a jigsaw might also work. Print the back template at the end of the plan, position it on the board, and trace it using a pencil. Make the Leash Holder’s Back PanelĬut one piece of wood to length for the back panel. TIP: For the easiest finish application, I suggest disassembling the holder by removing the shelves, hooks, and sawtooth hanger, applying the finish, and then reassembling. I kept mine natural and protected it with a few coats of this polyurethane alternative, but you could also use Polycrylic instead. You have options for finishing your dog leash holder, including painting, staining, or leaving it natural. You can even mix and match wood types, such as light-colored wood for the bone and darker-colored wood for the shelves.ĭon’t worry about drawing the bone shape I included a free template in the printed plan!Īll you need to do is print it, cut it out with scissors, trace it onto your board, and then cut it out with a scroll saw or jigsaw. I used scrap pieces of pine to make my holder, but you can use any wood you have on hand, or that suits your decor. If you don’t have one, you can smooth these surfaces by hand with sandpaper. I used my disc sander to smooth the saw marks on the bone’s outside edges. Related: How to Use a Router Table for Beginners Disc Sander If you don’t have a router, you can skip this step. This groove allows you to store objects on the shelves without sliding off. I made a shallow groove in the shelves using a cove bit and my router table. I used my drill to make holes and to drive the screws that attach the shelves to the holder. I used my scroll saw to cut the bone shape for the holder’s back panel, but you might be able to use a jigsaw instead. I used my miter saw to cut the back and shelves to their required lengths. I also used my router table and disc sander, but they are optional. To make your leash holder, you’ll need only three basic tools: a miter saw, a scroll or jigsaw, and a drill. Above are two shelves, perfect for storing treats, toys, poop bags, and other supplies! There are two hooks at the bottom for hanging leashes or collars. Then, it hit me, why not combine the two projects to create a handy holder for organizing my pup’s essentials? And just like that, I brought the two projects together to create this wall-mounted leash holder that adds charm and functionality to any space. Inspiration struck again when I placed my pup’s food on his bone-shaped dog bowl stand. The idea for this leash holder started when I had some hooks left over from this DIY key holder. Inspiration for This DIY Dog Dog Leash Holder Visit my site policies for more information. If you purchase from these links, I may earn a small commission at no additional cost to you. How Do You Finish the Dog Leash Holder?.Inspiration for This DIY Dog Dog Leash Holder.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |